AP 63 Anti-Graffiti Paste
Remove graffiti and paint from stone: AP 63 Anti-Graffiti Paste removes graffiti, paint, lacquer, wax, tar, glue, oil and grease stains and felt-tip marks – on facades, walls, floors and stairs, indoors and outdoors.
The special solvent composition and the structure of the paste remove paint effectively. As a paste, it also adheres to vertical surfaces. Where the substrate allows, combining it with a pressure washer is particularly effective.
Suitable for
- Marble, granite, natural and engineered stone
- Porcelain stoneware, ceramics, cotto
- Concrete, mortar, brick
Directions
- Work the undiluted paste into the pores with a spatula.
- Apply a layer of approx. 1 mm.
- Leave for 20–30 minutes.
- Wash off carefully with a brush and water jet (or pressure washer).
- Repeat if necessary.
Coverage: 1 kg for approx. 1 m².
Notes: If in doubt, test on an inconspicuous area. Wear safety goggles and protective gloves. Wash splashes on painted surfaces off immediately with plenty of water. For large areas, use the liquid GE 60 Paint Stain Remover.
Portion subject to VOC levy
Danger / UN 2319
H226 Flammable liquid and vapour.
H302 Harmful if swallowed.
H314 Causes severe skin burns and eye damage.
H317 May cause an allergic skin reaction.
H335 May cause respiratory irritation.
H410 Very toxic to aquatic life with long lasting effects.
Downloads (in German):
Technical data sheet
Safety data sheet
Shipping costs:
Shipping costs depend on the total weight of your order (see Shipping costs).
Processing time:
Orders are usually dispatched within 1–2 working days.
Collection:
Possible in Inwil – by appointment only.
Transport damage:
For products damaged in transit, the DPD form provided must be completed and sent.