KE 67 Candle Wax and Stain Remover

Remove candle wax and adhesive residue from stone: KE 67 removes candle wax, oil, tape and glue residue, resin, soot etc. from all stone surfaces, indoors and outdoors. The combination of solvents and the strong pressure of the aerosol spray allow good penetration into the pores. Deep-seated deposits are dissolved and greatly reduced.

Suitable for

  • Marble, granite, natural and engineered stone
  • Porcelain stoneware, ceramics, cotto
  • Concrete, mortar, brick

Directions

  1. First scrape off candle wax residue with a blade or spatula, e.g. the RG 955 blade scraper.
  2. Spray KE 67 undiluted onto the residue.
  3. After a few minutes, check whether another application is needed.
  4. Wash the surface with water and GR 75 Special Deep Cleaner.

Notes: Do not use in direct sunlight. If in doubt, test on an inconspicuous area. Wash splashes on painted surfaces off immediately with plenty of water. Deeply absorbed oil stains are best removed with OE 68 Oil and Stain Paste.

Hazard pictogram flame Hazard pictogram environment Hazard pictogram exclamation mark

Portion subject to VOC levy

Danger / UN 1950
H222-H229 Extremely flammable aerosol. Pressurised container: may burst if heated.
H315 Causes skin irritation.
H319 Causes serious eye irritation.
H317 May cause an allergic skin reaction.
H410 Very toxic to aquatic life with long lasting effects.

Downloads (in German):
Technical data sheet
Safety data sheet

No reviews No reviews

Shipping costs:

Shipping costs depend on the total weight of your order (see Shipping costs).

Processing time:

Orders are usually dispatched within 1–2 working days.

Collection:

Possible in Inwil – by appointment only.

Transport damage:

For products damaged in transit, the DPD form provided must be completed and sent.