FP 78 Cement Haze Remover for Porcelain Stoneware
Cement haze remover made specifically for porcelain stoneware and ceramics. For cleaning heavily soiled surfaces of polished, satin, matt and textured unglazed porcelain stoneware and all ceramics.
Highly effective cleaner for deep, intensive and final construction cleaning. Removes cement haze, limescale, mortar residue, water marks, pencil marks, hardened construction dirt and general soiling. The viscosity of the product allows it to penetrate the micropores. Emulsification releases even the smallest dirt particles from the pores.
Directions
- Pre-wet the surface and joints with water.
- Mix the solution: deep cleaning 1–2 L per 10 L of water (10–20 %), intensive cleaning 2–3 L per 10 L of water (20–30 %).
- Apply and leave for approx. 10 minutes.
- Scrub, then vacuum or squeegee up the dirty water.
- Rinse with plenty of clean water.
Best results are achieved with the stone clear RG 913 microfibre system, and with the RG 923 multi-fibre system on textured surfaces.
Coverage: 10 L of ready-to-use solution for approx. 30–50 m².
Not suitable for acid-sensitive materials such as marble, limestone, cement tiles and metal surfaces. If in doubt, test on an inconspicuous area. Wear protective gloves and safety goggles.
👉 Detailed guide: removing cement haze – step by step
Warning
H319 Causes serious eye irritation.
Downloads:
Technical data sheet
Safety data sheet
Shipping costs:
Shipping costs depend on the total weight of your order (see Shipping costs).
Processing time:
Orders are usually dispatched within 1–2 working days.
Collection:
Possible in Inwil – by appointment only.
Transport damage:
For products damaged in transit, the DPD form provided must be completed and sent.